Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who enjoys the flexibility of gas cooktops but needs an oven for baking? Find a dual-fuel range cooker that offers the best of both worlds.
Gas cooktops are the preferred choice of many home chefs who have years of experience in the kitchen because of their superior temperature control. They also allow them to utilize advanced cooking techniques such as grilling. These powerhouse stoves can be costly though, especially when you need an additional gas hook-up as well as an electrician to install it.
What is a 13amp outlet?
If you own a dual fuel range cooker (also known as an electric and gas oven) then you'll require an appropriately rated 13 amp plug. The plug will also need to be wired in the cooker circuit using a certified electrician.
This ensures that the current flowing through the plug does not exceed the safe limit which could cause an electrical fire. The plug has a fuse that controls the current. The fuse explodes when the current passes through it beyond its capacity. This safeguards the appliance from over-charge of electricity.
The fuse is classified at 13 amps, as indicated on the top of the plug and this is the maximum amount of current that the plug can carry without causing damage to the appliance or overheating the socket. When replacing fuses, it's important to use the same amperage rating as the original. If you replace the fuse using one with the different ratings, you run the risk of overheating the socket, and potentially putting yourself and others in high risk.
A 13 amp fuse is likely to be a ceramic type, which is very durable and is able to withstand high temperatures generated by the range cooker. The ceramic element is also fire-proof, making it a more suitable option than other kinds of fuse.
There are a few different ways that a 13 amp plug could be installed. The plug can be connected to a live socket using screws or a plastic jaw cord clamp. The clamp on the cord should be tightened after the plug is tightly pushed into place.
Some plugs may have a diagram of wiring on cardboard over the pins, and these should be removed before connecting the wires. The wires need to be cut to the right length, as when they are too long they could be crushed when plug covers are changed. The earth wire must be the longest one to ensure it is connected before the neutral and line pins.
How do I connect an outlet with 13amps?
The majority of dual fuel range cookers sold in the UK are connected to an outlet with a 13 amp rating and this is vital since ovens draw a significant amount of current and standard plug sockets are rated at 10 amps.
In general new appliances must be fitted with a plug at the point of sale. This is in order to be in compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances may not have a plug connected and this is the reason for the problem.
When connecting a cooker to an existing plug socket, the first thing to do is to ensure that the rating of the fuse in the fuse box is in line with the plug's rating. This is very important since a faulty sized fuse could be dangerous.
It is also advisable to check that the fuse is fully seated in the cartridge and there isn't any excessive movement within it. The next step is to prepare the flex that is to be used. Remove the sheathing to reveal the three conductors that are insulated. Then, cut the sheathing near the entry point to the plug (beyond the cord grip) with a utility knife, but without damaging the individual conductors. This nick should be wide enough that the sheathing can split and expand the nick as it is pulled back to reveal the cable underneath. Cut off the excess sheathing, leaving around 40mm beyond the flex.
This flex is placed over the plug and the earth terminal is placed at the top and the neutral and live terminals at the bottom. Using the conductors with the colors to guide you, the sheathing is then removed from each pin and the internal cable is fixed into the appropriate terminal using the cord grip. If the plug is fitted with an screw-type clamp for cords loosen it, and then pull back the insulation to expose the copper conductors. Connect each wire that is insulated to the appropriate terminal by using the channel inside the plug. Start with the earth conductor first, then the neutral and finally the live.
What is the maximum draw of a 13 amp plug?
The maximum current draw for 13amp plugs at 3kw at 230 volts is. This is a significant amount of power, but the standard fuse in the UK plugtop will not fail until the cable has heated to a risky temperature. A defective plug or socket can result in a fire, so it's vital to be aware of how much power you use, especially in the kitchen.
The ceramic fuses used in plugtops weigh around 25mm and are suitable for 240V mains. The fuses are marked with a BS Kitemark or a similar mark on their side, and they'll contain sand. There are glass or plastic alternatives, however they shouldn't be used with a live plug, unless you want to blow the fuse and potentially get electrocuted!
The majority of dual fuel range cookers sold in the UK need to be hard-wired and cannot be plugged directly into the wall socket. They are usually connected to a specific cooker ring circuit which is only suitable for appliances that use up to 20 amps.
Check the ring circuit of your home by using the fuse box, or ask a local electrician. Ask them if the sockets are on the same ring, or if they are distinct. They will also be able to tell you if there is a separate circuit to power your oven.
When you're looking to buy a new dual fuel range cooker, the size of your kitchen is an important aspect to take into consideration. We have a wide range of cookers that can fit any space. Choose from compact 50-60cm dual fuel models or vast 90cm+ double oven options from leading brands like Rangemaster and StovesAreUs.
If you're looking for something a little more unusual, don't worry - we also have a great collection of electric and gas multi-function cookers. These multi-functional appliances let you cook a variety of meals like pasta, casseroles and curries.
Explore our entire range of Cookers in Currys on our website or visit us in store to take a look. We offer free home delivery and installation on select range cookers, and we also offer flexible payment options. Our team is available to answer any questions you have. Contact us via email or by phone. Credit is subjected to the status of the account, and terms and condition apply.
What is the maximum draw of a switch for a cooker?
There is a lot of confusion about what the maximum current draw of a cooker switch actually is. The majority of cookers are hard-wired and connected to a specific oven-ring circuit not the standard socket. This is because they typically consume more than 20 amps when the electric and gas hob oven are used.
So, you won't find a dual fuel range cooker that can be fitted to a standard socket, as it could pose a serious fire risk and would be in violation of electrical regulations. An experienced electrician will install any new electrical components to a cooker in the kitchen and will make sure that the load (both the oven and the hob) will not exceed the power capacity of the circuit.
The benefits of a dual fuel range cooker are the responsive heat of a gas cooktop with the precision of an electric oven. This is the reason they are well-liked by chefs and home cooks alike. If you're looking to test different cooking techniques, such as searing and grilling, a dual-fuel range cooker is the best choice.
When purchasing duel fuel cookers , you must be aware of a number of aspects such as size, function and cost. Additionally, you'll also need to make sure that your house has the right gas hook-up for the appliance. If you're unsure you're not sure, it's recommended to have an Gas Safe engineer inspect your property prior to installation.
Currys' dual fuel range cookers come in a variety of models to suit all budgets. From affordable models by Indesit and Zanussi and our own Essentials collection. If you're looking for something little more advanced We also have an extensive selection of premium JennAir ranges, which come with a number of innovative features.
If you are buying a brand new dual fuel range cooker, it is crucial to consult the owner's manual for specific information regarding the electrical and gas requirements. It is essential to ensure that your home has a gas hook-up suitable, and you may need to get a plumber to install it for you, if needed. You may also need a dedicated cooker-ring circuit, installed by an experienced electrical engineer.